No signal detected on monitor

Closed
john - Jun 30, 2012 at 11:21 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jun 30, 2012 at 01:29 PM
Hello,
i had a problem about the NO SIGNAL ON THE MONITOR..last night im using my pc then the display said no signal detected. reinserted the video card the memory then turned it on but it stays the same...what can I do..please help me!

1 response

jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Jun 30, 2012 at 01:29 PM
Hello,

Try this 1

1) Once again remove the RAM from the slot, clean it and place it back properly or

try another slot. Check your RAM also. Even bad RAM will result in display problem.

Check your Video Card also.

2) If the problem still exists then try resetting your BIOS settings.

Turn off your PC and remove the power chord --> Open the cabinet --> Remove

the CMOS battery for 15-30 minutes and then put it back properly. Now plug the

power cord back in and switch ON your PC.

Click on the below hyperlink "CMOS Battery" if you don't have any idea about the

CMOS battery

CMOS Battery

If the problem still exist, click on the below link and follow the instructions in

"Hardware Reset".

https://ccm.net/faq/1192-lost-bios-password-resetting-the-bios

Good Luck
0