Usb device detecting but no showing
Closed
ds
-
Sep 2, 2010 at 06:53 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Sep 2, 2010 at 06:58 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Sep 2, 2010 at 06:58 AM
Related:
- Usb device detecting but no showing
- Usb show - Download - Backup and recovery
- Ps4 too many usb devices connected - Guide
- Synaptics pointing device driver - Guide
- Usb flash drive tester - Download - Backup and recovery
- Windows 7 bootable usb download - Download - Storage
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Sep 2, 2010 at 06:58 AM
Sep 2, 2010 at 06:58 AM
Hello,
Try this 1.
Click on Start --> Run ---> type diskmgmt.msc and click on OK.
Right-click on your Pen Drive --> Select "Change Drive Letter and Paths..." --->
Click on "Add" button ---> Select your drive letter and click on OK.
Note : If the drive letter is already assigned, then try changing the drive letter
by clicking on "Change" button instead of "Add" button in the above step.
If the problem still exists then
Click on Start --> Run --> type regedt32 and click on OK.
Registry Editor will be opened.
First backup your registry by going to File --> Export.
At the left side navigate to this location
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-
E325-11CE-BFC1-08002BE10318}
If you see any upperfilter or lowerfilters at the right side delete it.
Good Luck.
Try this 1.
Click on Start --> Run ---> type diskmgmt.msc and click on OK.
Right-click on your Pen Drive --> Select "Change Drive Letter and Paths..." --->
Click on "Add" button ---> Select your drive letter and click on OK.
Note : If the drive letter is already assigned, then try changing the drive letter
by clicking on "Change" button instead of "Add" button in the above step.
If the problem still exists then
Click on Start --> Run --> type regedt32 and click on OK.
Registry Editor will be opened.
First backup your registry by going to File --> Export.
At the left side navigate to this location
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-
E325-11CE-BFC1-08002BE10318}
If you see any upperfilter or lowerfilters at the right side delete it.
Good Luck.
