Search : in
By :

I want to create a network thru a switch

Last answer on Jun 4, 2009 9:23:15 am BST Dinosours2, on Jun 4, 2009 1:45:15 am BST 
 Report this message to moderators

Hello,
I have 3 pc and 2 laptop. My pc already have internet connection, connected to a d-link 8 hub switch. the question...how do share the internet and printer thru the switch? do i have to configure the ip add and the dns server address...what about the alternate configuration? do i have to set that to? Pls Advise

Configuration: Windows XP Internet Explorer 8.0

Best answers for « i want to create a network thru a switch » in :
[Networks] Hub, switch and router Show [Networks] Hub, switch and router Introduction The hardware Introduction Depending on the size and type of network these 3 types of hardware are used: The Hubs, Switches and Routers. The hardware The Hub The hub (hub) is the...
[VMWare] The different modes of VMWare network Show[VMWare] The different modes of VMWare network If you create a virtual machine using VMWare, 3 types of connectivity are provided: Host-only, NAT or Bridged. You can't use NAT and Bridged modes if you do not have the following...
Connection very low or no network ShowConnection very low or no network Network problem Solution Network assign but no connectivity Problem on the network layer Solution Problem with WiFi Below is a tips of how to solve your network trouble under windows XP...
Creating manually your ADSL connection ShowCreating manually your ADSL connection. Go to the new network setup wizard. Setting up your connection: The interfaces of connection utility programs provided by most Internet Service Provider are sometimes hard to configure and to...
Creating a local area network ShowWhy set up a local area network? When you have several computers, it can be convenient to connect them to each other to create a local area network (LAN). Setting up such a network costs very little, contrary to what people may think. Here are a...
Creating an ad hoc WiFi network ShowPresentation of the ad hoc WiFi network If you have two or more computers equipped with wireless adapters (WiFi cards), it is possible to easily connect them in a network by setting up a so-called "ad hoc" network, that is, a computer-to-computer...
Creating an ad hoc WiFi network ShowPresentation of the ad hoc WiFi network If you have two or more computers equipped with wireless adapters (WiFi cards), it is possible to easily connect them in a network by setting up a so-called "ad hoc" network, that is, a computer-to-computer...

1

firefold001, on Jun 4, 2009 8:04:14 am BST

Good Question and its easy to make them connected. Just get some network cables with the jacks. Connect your printer with your system in the jack backside. Also you dont need to configure your ip address. Its very normal when you connect with the printer, you will get connection online.

http://www.firefold.com/Cat5E-Keystone-Jacks-C213.aspx

Reply to firefold001

2

 mikethedike, on Jun 4, 2009 9:23:15 am BST
  • +1

Use peer to peer type network


Melisio Mascarenhas
mikethedike
mumbai, india

Reply to mikethedike