Search : in
By :

Network centre of my ZG5

Last answer on Apr 30, 2009 12:39:02 pm BST Jesmint, on Apr 30, 2009 8:54:03 am BST 
 Report this message to moderators

Hello,
Netork Centre - connect to the internet via LAN wirless or 3G the software has been delected. I would only want the LAN wirless or 3G the software do you know where can i found it or do you have the software. And when to install at the program file or etc...

The wireless : 802.11 b/g LAN: 10/100 base T

And i also never saw the icon wireless management icon below the bar?
Do you know wat happen to my latop.

Configuration: Windows XP
Internet Explorer 7.0

Best answers for « network centre of my ZG5 » in :
Network equipment - The hub Show What is a hub? A hub is an element of hardware for centralising network traffic coming from multiple hosts, and to propagate the signal. The hub has a certain number of ports (it has enough ports to link machines to one another, usually 4, 8, 16 or...
Download Desktop Central - Free Windows Tools Show
Network Controller not working!!! Show
[Windows XP] Repairing the network connection using command line Show[Windows XP] Repairing the network connection using command lines Under Windows XP there is a small feature allowing you to repair a network connection. Go to the Network Connections options in Control panel (Control Panel / Network...
[VMWare] The different modes of VMWare network Show[VMWare] The different modes of VMWare network If you create a virtual machine using VMWare, 3 types of connectivity are provided: Host-only, NAT or Bridged. You can't use NAT and Bridged modes if you do not have the following...
Introduction to network bridge ShowIntroduction to network bridge What is a bridge? XP network bridge: between a wired network and a WiFi network What is a bridge? A bridge has a foot in each network and acts on the link layer (level 2). It is able to pass frames from...
Creating a local area network ShowWhy set up a local area network? When you have several computers, it can be convenient to connect them to each other to create a local area network (LAN). Setting up such a network costs very little, contrary to what people may think. Here are a...
NAT- Network address translation, port forwarding and port trigg ShowThe principle of NAT Network address translation or NAT was developed in order to respond to the shortage of IP addresses with IPv4 protocol (in time the IPv6 protocol will respond to this problem). In fact, in IPv4 addressing the number of...
Creating an ad hoc WiFi network ShowPresentation of the ad hoc WiFi network If you have two or more computers equipped with wireless adapters (WiFi cards), it is possible to easily connect them in a network by setting up a so-called "ad hoc" network, that is, a computer-to-computer...
Ask your question Reply

1

acedavid70, on Apr 30, 2009 11:05:21 am BST

Hi,
try this link to download the network driver:
http://support.acer-euro.com/drivers/downloads.html
select your computer first.

   
Reply to acedavid70

2

 mikethedike, on Apr 30, 2009 12:39:02 pm BST

Hi,
first of all if u want wireless net access thru ur lan then u first must have a wireless access point and a wireless usb adaptor

wireless access point is ahardware device that u connet to ur lan after u switch it on it transfer ur lan to a wireless network, inshort it becomes a WIRELESS ACESS POINT

wireless usb adaptor is a hardware that helps ur laptop to detect and connect the wireless lan

both these harware devices are available in the market, the price and the range (wireless distance) varies as per the product

inaddition to these, there also is adevice which is called wireless booster or extended, like its name suggests.. the sole purpose of this device is to extend the given range of the wireless acess point. all u have to do is to plug it to a 220V socket, once switched on it turns electrical wire into wireless acess points so u have the singal stronger i the various rooms of ur workplace

like most, the above first two mentioned items come with an intalltion cd, install the software for the wireless usb adaptor on ur socket,

once this is done,

all u have to do is enter the ip settings for this u will have to

click start menu>control panel>network connections
now plug in the usb adaptor
an icon will be created with usb manufaturer name and model catorgised as wirelss connection
right click on that icon
click propeties
scroll and select Internet protocol (TCP/IP)
enter the values for the
ip adress
subnet mask
default gateway
alternate DNS
primary dns

click the advance tab and in the IP settings click add
and eneter the external ip adress

then in the wins tab
enter the value
(ps. apart from both the ip addresses in which the last digit changes, all the values will be the same for all the computer that are connected to the internet via lan, note down these setting from any of these pc and enter the same in ur laptop)

also note in most lan networks connection to the ip is controlled via ip adresses

click pply then ok


awaiting
comments


Melisio Mascarenhas
mikethedike
India

   
Reply to mikethedike
Ask your question Reply
They need your help