No Video After Changing CPU Speed
Solved/Closed
Related:
- No Video After Changing CPU Speed
- Need for speed most wanted 2005 - Download - Racing
- Blackmagic disk speed test windows - Download - Diagnosis and monitoring
- Need for speed unbound free download - Download - Racing
- No signal on monitor but cpu running - Guide
- Need for speed 2012 download apk - Download - Racing
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jul 11, 2010 at 04:17 PM
Jul 11, 2010 at 04:17 PM
Hi,
Try this 1
Turn off your PC --> open the cabinet --> remove the CMOS battery
Now "Turn ON" your PC --> after few seconds again "Turn Off" your PC.
Place the CMOS battery back properly ----> Now Turn ON your PC.
If the problem still exists
Remove the RAM from the slot --->clean it and place it back properly or try
different slot.
Try this 1
Turn off your PC --> open the cabinet --> remove the CMOS battery
Now "Turn ON" your PC --> after few seconds again "Turn Off" your PC.
Place the CMOS battery back properly ----> Now Turn ON your PC.
If the problem still exists
Remove the RAM from the slot --->clean it and place it back properly or try
different slot.
Jul 11, 2010 at 04:27 PM
Jul 11, 2010 at 04:38 PM
Well the above procedure resets the changes made in bios.
You can try jumper settings. Just click on the below link and try hardware reset.
https://ccm.net/faq/1192-lost-bios-password-resetting-the-bios
Goodluck
Jul 11, 2010 at 06:03 PM