Inetrnet not Connecting in VistaClosed

Question

Hello,
I am using win Vista ultimate 64 bit.I am using BSNL broadband with UTStar WA3002G4 Modem. Recently I changed My Modem Configuration from pppoe to bridging so that i can access internet like a dial up. I made connection in Vista to connect to internet, by giving my user id and password. But every time it shows connection unsuccessful. My modem and  network cables are working fine. In pppoe mode i get net connection without any problem. Why it is not connecting in bridge mode.? Is there any options to be changed in IE or network properties?New connection was made correctly as suggested by BSNL experts. But they failed to Solve the connection problem in VISTA. Pls Help...

sharpman · Answer

bridge mode is not for connecting to internet - bridge mode is for connecting two pieces of equipment together hence bridge.

sharpman · Answer

go to this link, there is a thread with the settings for your particular model.

http://www.indiabroadband.net/bsnl-broadband/21244-utstar-wa3002-g4-quick-reference.html

http://mydataone.net/router/wa3002g4.html
http://clickmakesense.blogspot.com/2009/06/how-to-configure-ut-starcom-wireless.html

rajvkaimal · Answer

thank u sir,

but my problem is not modem.

my problem is vista.

i fails to make a broadband dialup connection. every time vista detects my inbuilt modem to dial. when i disabled it from device manager connection says no device found. so my doubt is how can i make dial up connection with this Utstar DSL modem.

Thanking you

Rajesh

sharpman · Answer

https://www.helpwithpcs.com/internet/internet-connections.htm

as i said before. bridge mode is for connecting two pieces of equipment together.

if you wish to connect to internet in dial up mode then you are going to need a standard modem.
the modem you are using is a ADSL modem which is used for broadband connections.

what I don't understand is that if you have broadband already, why do you wish to connect using dial up ?

sharpman · Answer

have a look at this document
http://mumbai.mtnl.net.in/triband/htm/utstarusrguide1.0.pdf

dial up settings for vista
https://www.ncf.ca/ncf/support/connectvista/index.html

sharpman · Answer

http://www.queensu.ca/its/networks/dialup/vista.html
https://www.techadvisor.co.uk/forum/?action=showthread&forumid=23&threadid=331516

rajvkaimal · Answer

sir,

i have a broadband connection. U asked me Why i need a dial up when i have a broadband.Actually i don't need a Broadband which is always on. I only need to connect to broadband service as per my official purpose.So some BSNL officials asked me to set the connection as a broadband dial up.They ask me to make a new connection in network sharing center.
Network sharing center > Make new connection > Connect to internet > Broadband pppoe which requires a user name and password > connect.

this was the the method for the dial up. but it  is not working for me. Vista saying connection unsuccessful. May e it will be the problem with the router . I will Ask them to check one more time.

Thanks a lot for your help.

Regards,
Rajesh

Inetrnet not Connecting in Vista

7 responses

Similar discussions

Subscribe To Our Newsletter!