- Saturday August 30, 2008 - 10:35:06 am BST
- registered : 945355
- online : 34268
- questions/day : 4656
- Answer rate : 81.2%
- 08:05 Is this the right tool for the job? (Network)
- 07:00 state cable & cross cable (Network)
- 04:27 pc (Windows)
- 04:15 asp, database problem in server (Webmastering)
- 04:05 missing or corrupt files (Windows)
- 03:02 Date change with column paste (Office software)
| Data transmission |
Introduction to digital transmission
Digital transmission is the sending of information over a physical communications media in the form of digital signals. Analogue signals must therefore be digitised first before being transmitted.
However, as digital information cannot be sent directly in the form of 0s and 1s, it must be encoded in the form of a signal with two states, for example:
- two voltage levels with respect to earth
- the difference in voltage between two wires
- the presence/absence of current in a wire
- the presence/absence of light
- ...
This transformation of binary information into a two-state signal is done by the DCE, also known as the base band decoder, which is the origin of the name base band transmission to designate digital transmission...
Signal encoding
To optimise transmission, the signal must be encoded to facilitate its transmission on the physical medium. There are various encoding systems for this purpose which can be divided into two categories:
- Two-level encoding: the signal can only take on a strictly negative or strictly positive value (-X or +X, where X represents a value of the physical quantity being used to transport the signal)
- Three-level encoding: the signal can take on a strictly negative, null or strictly positive value (-X, 0 or +X)
NRZ Encoding
NRZ encoding (meaning No Return to Zero), is the first encoding system, and also the simplest. It consists of simply transforming the 0s into -X and the 1s into +X, which results in a bipolar encoding in which the signal is never null. As a result, the receiver can determine whether a signal is present or not.
NRZI Encoding
NRZI encoding is significantly different from NRZ encoding. With this encoding, when the bit value is 1, the signal changes state after the clock tick. When the bit value is 0, the signal does not change state.
NRZI encoding has numerous advantages, including:
- Detection of whether a signal is present or not
- The need for a low signal transmission current
However, it does have one problem: the presence of continuous current during a sequence of zeros, which disturbs the synchronisation between transmitter and receiver.
Manchester Encoding
Manchester encoding, also called biphase encoding or PE (for Phase Encode), introduces a transition in the middle of each interval. In fact, it amounts to performing an exclusive OR (XOR) of the signal with the clock signal, which translates into a raising edge when the bit value is zero and a falling edge in the opposite case.
Manchester encoding has numerous advantages, including:
- as it does not take on a zero value, it is possible for the receiver to detect a signal
- a spectrum occupying a wide band
Delay Encoding (by Miller)
Delay encoding, also called Miller encoding, is similar to Manchester encoding, except that a transition occurs in the middle of an interval only when the bit is 1, which allows higher data rates...
Bipolar encoding
Bipolar encoding is a three-level encoding. It therefore uses three states of the quantity transported on the physical medium:
- The value 0 when the bit value is 0
- Alternatively X and -X when the bit value is 1
| 26/02 15h05 | How to make a video clip ? | Video |
| 09/06 15h37 | Wifi amount of data transmission | 1 |
| 13/05 11h25 | Bit transmission | 0 |
| 28/04 15h08 | Digital signature | 1 |
| 28/04 13h36 | Transmission delay | 1 |
| 05/04 04h15 | Lost disc for USB DIGITAL CAMERA | 1 |
 | iTunes for Windows - ITunes is a free digital media player application for playing and organizing digital music and video files. The program is... | Category: Podcasting/Streaming License: Freeware/gratuit |
 | MediaCoder - MediaCoder is a free universal batch media transcoder, which nicely integrates most popular audio/video codecs and tools... | Category: Video editing License: Open Source |
 | Recuva - Recuva (pronounced "recover") is a freeware Windows utility to restore files that have been accidentally deleted from... | Category: Backup License: Freeware/gratuit |