Manufacturer: Cisco Systems
Rating 0/5 (0 votes)
Major strengths of this productAreas for improvement

Cisco Systems Cisco - Network adapter cable - RJ-48C (F) - BNC (M)

The 75-120-ohm adapter cable connects Cisco 120-ohm E1 port adapters to 75-ohm unbalanced G.703 E1 lines. The adapter has an eight-pin RJ-48C connector on the 120-ohm side and dual BNC coaxial connectors (transmit and receive) on the 75-ohm side. Two

Product information

NameCisco Systems Cisco - Network adapter cable - RJ-48C (F) - BNC (M)
DescriptionThe 75-120-ohm adapter cable connects Cisco 120-ohm E1 port adapters to 75-ohm unbalanced G.703 E1 lines. The adapter has an eight-pin RJ-48C connector on the 120-ohm side and dual BNC coaxial connectors (transmit and receive) on the 75-ohm side. Two switches on the 120-ohm side allow the outer conductor of the cable (the input port of the E1 port adapter) to be either isolated from or connected to a protected earth ground. The 120-ohm E1 ports of your port adapter connect to the 75-120-ohm adapter cable using RJ-48C connectors and Category 3 or Category 5 shielded foil twisted-pair (FTP) cable with 120-ohm impedance.
Best answers for « Cisco Systems Cisco Network adapter cable RJ 48C (F) BNC (M) » in :
Wifi atheros card on linux ShowWifi atheros card on linux The deposits Linux headers Madwifi tools Observation Loading the Modules Verification Most of laptops have the atheros wifi network adapter, but when you install some versions of linux like debian,...
How to crimp a cable RJ45 ? ShowHow to crimp a cable RJ45 ? What you need? How to proceed? Making a straight cable The standard EIA / TIA 568 (A & B) For crossover cable 10/100baseT To complete crossover cable or cross gigabit On Gbic 1000BaseT eg An image to better...
[VMWare] The different modes of VMWare network Show[VMWare] The different modes of VMWare network If you create a virtual machine using VMWare, 3 types of connectivity are provided: Host-only, NAT or Bridged. You can't use NAT and Bridged modes if you do not have the following...
Download Realtek Wireless drivers for XP (RTL8187) ShowRealtek RTL8187 Wireless 802.11g 54Mbps USB 2.0 Network Adapter SITECOM WL-168 Wireless Network USB Adapter 54g SURECOM EP-9001-g 802.11g 54M WLAN USB Adapter
Download Network Event Viewer ShowNetwork Event Viewer enables you to fully manage the logs of your network. You can obtain and store in real time all the error messages generated by Windows machines on your private network. Advantage The application takes care of the filter, to...
Installing a network adapter ShowPurpose The purpose of this article is to set up a network to enable data exchanges between computers, resource sharing and network games. Is it therefore necessary to install a network card in each computer that may be part of the local area...
Network cards ShowWhat is a network card? A network card (also called a Network Adapter or Network Interface Card, or NIC for short) acts as the interface between a computer and a network cable. The purpose of the network card is to prepare, send, and control data...
Creating a local area network ShowWhy set up a local area network? When you have several computers, it can be convenient to connect them to each other to create a local area network (LAN). Setting up such a network costs very little, contrary to what people may think. Here are a...
They need your help