Installing a network card ShowGoal
The goal is to set up a network in order to exchange data or play games on the network. Thus, it is necessary to install a network card on every computer that may become part of the LAN. The purpose of this tutorial is to help you to install a...
[Windows XP] Repairing the network connection using command line Show[Windows XP] Repairing the network connection using command lines
Under Windows XP there is a small feature allowing you to repair a network connection. Go to the Network Connections options in Control panel (Control Panel / Network...
[Linux]Restarting the network interface using command lines Show[Linux]Restarting the network interface using command lines
When setting up a network, specially if you need to verify that a DHCP server assigns IP addresses correctly, restarting the network interface using command lines rather than the...
[Ubuntu 9.04] Installing VirtualBox 3 Show[Ubuntu 9.04] Installing VirtualBox 3
You may have noticed VirtualBox is already present in the Ubuntu, but note that only the version 2.x, and without USB support is present.
Here is how to install version 3.x:
wget -q...
Installing a network adapter ShowPurpose
The purpose of this article is to set up a network to enable data exchanges between computers, resource sharing and network games.
Is it therefore necessary to install a network card in each computer that may be part of the local area...
Network cards ShowWhat is a network card?
A network card (also called a Network Adapter or Network Interface Card, or NIC for short) acts as the interface between a computer and a network cable. The purpose of the network card is to prepare, send, and control data...
The PC Card bus (PCMCIA) ShowPC Card Bus Introduction
The PC Card bus was developed in 1989 by the PCMCIA (Personal Computer Memory Card International Association, which is the name sometimes given to the bus) consortium in order to extend current peripheral equipment...