Search : in
By :

Configuration of ITI ADSL Modem [Type 2]

Last answer on Aug 6, 2009 11:47:04 am BST Rahul, on May 22, 2009 12:53:48 am BST 
 Report this message to moderators

Hello friends,
I have the ITI ADSL Mdem [type II]. It is configured Bridge Mode connection {BSNL BROADBAND}. It gives connection to internet but in the system tray a message is displayed when it first connects that is Limited or no connectivity. Please tell me the way to solve this problem.

Configuration: Windows XP Internet Explorer 7.0

Best answers for « Configuration of ITI ADSL Modem [Type 2] » in :
Make calls from your PC ShowMake calls from your PC Telephone modem CTS Voice Mode Data Mode Call from PC to PC Call with an ADSL modem from PC to phone. Do not mix PSTN and ADSL! With a modem 33 or 56Kb / s, to connect, the modem dials the phone...
Testing adsl with your connection line ShowTesting adsl with your connection line The below link allows to test all the accessibilities of ADSL with your connection line which however varies depending on Internet Service Provider (ISP) http://www.speedtest.bbmax.co.uk/
Changing the hard drive of wireless ADSL router ShowChanging the hard drive of wireless ADSL router Intro Solutions Intro A wireless ADSL router is an electronic device provided to ISP subscribers for broadband connection. The device is used primarily as ADSL modem, but also enables...
ADSL ShowWhat does xDSL and ADSL mean? The term DSL or xDSL means Digital Subscriber Line and covers all technologies installed for digital transport of information over a single telephone line connection. xDSL technologies are divided into two main...
Linking two PCs with a null modem cable ShowLinking two computers without network cards The best way to link two computers is to use an RJ45 cable to connect the machines' network cards. However, when one or both of the computers has no network card, there is still a fairly easy way to...
The PC Card bus (PCMCIA) ShowPC Card Bus Introduction The PC Card bus was developed in 1989 by the PCMCIA (Personal Computer Memory Card International Association, which is the name sometimes given to the bus) consortium in order to extend current peripheral equipment...
Ask your question Reply

1

derekmichael54, on May 22, 2009 10:47:39 am BST
  • +1

There must be a problem with the cable you are using. please try to change it and see.. if the problem persists please contact your internet provider!

   
Reply to derekmichael54

3

sumit, on Jul 29, 2009 6:31:01 am BST
  • +1

I am facing the same problem. my ethernet cable is also working fine. but in the tray icon either i use the ethernet cable or Wi-Fi, the connectivity is always limited. though the internet works fine,but i cannot access my modem. How to resolve this problem???

   
Reply to sumit

4

 zankar is best, on Aug 6, 2009 11:47:04 am BST
  • +3

HEY DUED THEIR IS NO PROBLEM WITH THE CABLE YOU JUST CHANGE THE INTERNAL MODEM IP ADDRESS TO 192.168.1.150
SUBNET MASK TO 255.255.255.0
AND THE LAAST OPTION TO
192.168.1.50

THIS MESSAGE GOES


IN A HURRY
BUT NO PROBLEM USE CATE CABLE

   
Reply to zankar is best
Ask your question Reply
They need your help