| 1 Doe12, on Apr 29, 2009 12:16:14 pm BSTIn order to connect to PPPOE you should create a connection. in your PSP you cannot any connection | 2 ishaan, on Apr 29, 2009 2:44:46 pm BSTThanks for replying man!!
but solved my problem 30 min after asking this question...
now i can connect seamlessly to my wifi network with any device.....
& in psp we can create pppoe connection too...
actually those bsnl employees created a dailup type connection on my desktop. every time i hav to connect that for using internet but now i just made that auto in router config..
now i don't need any pppoe in other devices.
if some body is facing this type of problem than reply here... i will try to help.. | 3 adi, on May 7, 2009 7:45:29 am BSTHello ishaan,
I m having the same problem. I wanna connect my laptop on wifi as well as my desktop to the internet . Please tell me what settings i have to change to do that. and tell me how to configure the router such tht i dont have to configure pppoe on every device. | 10 ishaan, on Jun 14, 2009 10:52:43 am BSTHere the setup which u need to do...to use net on desktop & wifi as well
actually bsnl employes create a desktop dialer, but ur router/modem can connect on its own. so u can connect ur devices without the need of conncting from desktop always. juz turn on router & thats it.
ok follow the steps mentioned:-
go to the modem webpage by typing address 192.168.1.1,when the username and password window pops up enter admin for both (username and password),next click on advanced setup on the left and select the WAN option,click on edit of first WAN settings listed (usually VPI 0/ VCI 35)
in next page click next the page that comes after will have various list,in that select 2nd option which is PPP over Ethernet (PPPoE) and again click next,
in this page enter the details like username & password and in the PPPoE Service Name enter dataone,Authentication Method keep it auto,at the bottom of the select this option : Bridge PPPoE Frames Between WAN and Local Ports (Default Enabled) !
Now click next and next untill you come to the last page where it says WAN setup summery ! click save and in the next page click on save/reboot !!
Thats it you are done ! Now you have always on connection and you do need to click on the desktop dialer ! If you want you can delete the desktop dialer shortcut and also the default dialer for BSNL from the system !
after doing this DHCP server will be assigned on ur router & you can connect ur wifi devices with default settings.
Note:- as iam not regular user of this forum so if u still wana contact me than mail me at ishaansood@gmail.com or better be if u use orkut than contact me there by putting my above email in search option. | 23 sunny, on Jul 21, 2009 8:49:03 pm BSTHey thanx dude....i have another query.......how to add network key to the router so that only i can connect my devices |
|
|
| 5 psp2004, on Jun 1, 2009 8:37:47 am BSTDude i have the same router and i tried all that I could to connect my psp.
Would be greatly thankful if you could email me detailed steps mailsatishvarma@gmail.com
Thanks a lot in advance !!! | 8 ishaan, on Jun 14, 2009 10:50:25 am BSTHere the setup which u need to do...to use net on desktop & wifi as well
actually bsnl employes create a desktop dialer, but ur router/modem can connect on its own. so u can connect ur devices without the need of conncting from desktop always. juz turn on router & thats it.
ok follow the steps mentioned:-
go to the modem webpage by typing address 192.168.1.1,when the username and password window pops up enter admin for both (username and password),next click on advanced setup on the left and select the WAN option,click on edit of first WAN settings listed (usually VPI 0/ VCI 35)
in next page click next the page that comes after will have various list,in that select 2nd option which is PPP over Ethernet (PPPoE) and again click next,
in this page enter the details like username & password and in the PPPoE Service Name enter dataone,Authentication Method keep it auto,at the bottom of the select this option : Bridge PPPoE Frames Between WAN and Local Ports (Default Enabled) !
Now click next and next untill you come to the last page where it says WAN setup summery ! click save and in the next page click on save/reboot !!
Thats it you are done ! Now you have always on connection and you do need to click on the desktop dialer ! If you want you can delete the desktop dialer shortcut and also the default dialer for BSNL from the system !
after doing this DHCP server will be assigned on ur router & you can connect ur wifi devices with default settings.
Note:- as iam not regular user of this forum so if u still wana contact me than mail me at ishaansood@gmail.com or better be if u use orkut than contact me there by putting my above email in search option. | 9 ishaan, on Jun 14, 2009 10:52:04 am BSTClick on arrow to read my full post
as its long post its been hided so click on that arrow at the end of post in middle
to view full post |
| 30 Bunty, on Sep 24, 2009 8:59:27 am BSTHey Ishaan
I have done the configuration for My BSNL Modem (DNA-A211-i) but wat r setting i need to do in my PSP. can u plz explain the STEPS: | 32 ishaan, on Sep 25, 2009 4:32:21 pm BSTHey there
just serch the wifi network from ur psp & select next-next
slelct default settings & u are done
simple.
if ur router is configured succesfully than u can use wifi on ur psps with default settings
enjoy | 35 Bunty, on Sep 27, 2009 1:42:55 pm BSTThnks dude 4 replying
I did the same steps as u told in my router setting as well as in my PSP, My psp firmware is 3.71 MM3. But i m Getting an error on my PSP says "Connection to the Server Failed. A DNS Error has occoured.(80410410).
Can u Plz Help as i m eager to connect my PSP tp Internet. | HEY
hav u sucessfully done that setings on ur router?
if that part is sucessful than in ur psp u just hav to select serch that network & click on next-next & input only network key...
select accquire ip address automatically
hope it helps | 38 Bunty, on Sep 28, 2009 11:29:54 am BSTHi Ishaan
My Psp Acquires IP adress automatically, but wen it says testing connection, i receive an error |
|
|
|
|
|
|
| 14 Sagar, on Jun 14, 2009 12:04:31 pm BSTDear,
My wireless doesnt work at all.. how to configure it... i logged in using admin user on default IP address but there i cant understand anythign ??
:-(( |
| 15 ptiwari2ki, on Jun 28, 2009 11:30:12 am BSTI have DNA-211-I type II modem provided by BSNL. On connecting through dialer created on destop connected to modem via ethernet, there is absolutely no prob. I want to connect it to two more pc's and one laptop via remaing ethernet ports/wireless. What changes do i need to make in the modem (step by step procedure please) and my pc's/laptop so that all can use the bandwidth of 2mbps provided by bsnl |
| 21 vick, on Jul 18, 2009 5:52:24 pm BSTHi dude...not able 2 connect my psp 2 wifi ...plz help me out with detailed description...my id vivek.g27@gmail.com...dude plz plz plz help me out..thank yo |
| 24 Surjya, on Jul 23, 2009 1:28:13 pm BSTSir,
I have DNA-A211-1 Modem supplied by the bsnl authority. I want it to wereless enable so that simultionuly I use the internet both in my desktop as well as laptop. Please help and reply me with the detail of the modem setting.
Ok Bye....... |
| 25 Munna, on Aug 2, 2009 3:02:05 pm BSTHi Ishaan,,
Im also having the same modem DNA A211-1 but i dont know how to get wifi in it...i access only my pc by cable but not my laptop and Iphone...pleme a mail with details....I dont know what is PSP or other tings...My ID is goutham.atla@gmail.com |
| 27 Vignesh, on Sep 8, 2009 11:07:14 am BSTHi I have the Same ITI DNA-A211-1 router/modem. I face the issue of getting connected to Wireless network of BSNL broadband network. Even i have configured the router with required IP and PPPOE settings, even choosing Auto. But still im not able to find the network in my wireless network listings. I m using Laptop with VISTA.
Any suggestion would be helpful. Thanks. | 28 ishaan, on Sep 8, 2009 11:35:52 am BSTHey
in ur router settings, check that.. have u selected hide acess point .if yes than deselect it...
hope this helps....& if u face any prblm let me know
ishaan | 29 Vignesh, on Sep 8, 2009 4:50:16 pm BSTYes, I have delected it already, but still im not able to get through.!! Wireless network name is shown in the Network listings. but if i select that to connect it gives my "Diagnoise the problem" or " Connect to different Network". Please help me in resolve this issue. Thanks.
Vignesh |
|
|
| 33 yragghuvanshi@gmail.com, on Sep 27, 2009 7:47:19 am BSTBro.. u mean yor connection is open nw.... dat means any 1 can enter into yor ntwk...
as u said u dont need to login nw .. i mean ..no username password... means yor ntwk iznt encrypted ... watchout buddy..... |
|
|
Broadband dna a211-1 configuration doc