Configuration: Windows XP Internet Explorer 6.0
Hai
I would use a router to connect both computers and to the internet, that way one does not have to be on for the other to connect to the internet. |
Hai
i am Parthiban, you to connect RJ45 PC to Laptop. RJ 45 Pin Configration i will give bellow RJ45 pin configration : 1 2 3 4 5 6 7 8 RJ45 LapTop RJ45 PC 1 3 2 6 3 1 4 4 5 5 6 2 7 7 8 8 9 Dummy 9 Dummy Thanks & Regards Parthiban V |
right click the my computer give some name in the computer name, same name give in to the other computer. and which floder or any thing u wann share just right click them and share it. it will work |
Dear if you want to connect u r laptop with u r pc. first of all u need straight cable for conneting u r laptop to u r pc.
now u r laptop and u r pc are in workgroup or in sharing mode. u just give same range of ip like 10.100.11.1 to 10.100.11.2 with same subnet mask. so that they communicate. and u r in ready mode to share and whatever you want . |
|
hi Zennon4,
i have never try it but i will try it and i will let u know soon;-) |
|
Additional Information required:
1. Do you have a router? I’m assuming that you do not but I need a yes or no to this question. 2. Do you have a second Ethernet card in your PC or at least 1 wireless and one PCI-Ethernet card. a. You will need atleast 2 cards in one of these 2 options to be able to connect to the internet and connect through LAN simultaneously. 3. There is a way to connect and configure your laptop and your desktop PC via an Ethernet cable with just one Ethernet port or card in each computer but this will not allow sharing of the Internet if a second communications device is not added or built in to the desktop PC. The desktop PC should be your main Internet connection if you do not have a router. 4. Reply to these questions and I'll get back to you with your configuration. Romerro, aka The PC Builder... |
Hi,
If you have Ethernet adapter both in PC and Laptop it will possible. Just go to the TCP ip settings of the laptop and give the ip address: 10.1.1.1 Subnetmask:255.255.255.- Default gateway: 10.1.1.2 Just go the TCP Ip settings of the PC and give the IP address: 10.1.1.2 Subnet mask:255.255.255.0 Default gateway: 10.1.1.1 Just connect both lan using the system RJ45 connector and ping 10.1.1.2 from your laptop . If you get the reply both the systems are connected. |
Résultats pour connect pc & laptop [xp]
Résultats pour connect pc & laptop [xp]
Résultats pour connect pc & laptop [xp]
Résultats pour connect pc & laptop [xp]