Computer stuck in power save
Solved/Closed
mariaellen
Posts
3
Registration date
Sunday May 5, 2013
Status
Member
Last seen
May 5, 2013
-
May 5, 2013 at 06:52 AM
mariaellen Posts 3 Registration date Sunday May 5, 2013 Status Member Last seen May 5, 2013 - May 5, 2013 at 08:19 AM
mariaellen Posts 3 Registration date Sunday May 5, 2013 Status Member Last seen May 5, 2013 - May 5, 2013 at 08:19 AM
Related:
- Second monitor stuck in power save mode
- Power saving mode in computer - Guide
- Save as pdf office 2007 - Download - Other
- Keyboard stuck in shortcut mode - Guide
- Sceptre monitor no signal entering power save mode - Windows Forum
- Thinkvision monitor power saving mode - Hardware Forum
2 responses
mariaellen
Posts
3
Registration date
Sunday May 5, 2013
Status
Member
Last seen
May 5, 2013
May 5, 2013 at 08:19 AM
May 5, 2013 at 08:19 AM
Thank you for your advice. I have a more knowlegable tham me friend
Coming over tomorrow & will try this out.
Many thanks
Maria
Coming over tomorrow & will try this out.
Many thanks
Maria
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
May 5, 2013 at 08:00 AM
May 5, 2013 at 08:00 AM
Hello,
Try this 1
If you notice that your CPU fan is running but there is no display in the screen,
then remove the RAM from the slot, clean it and place it back properly or try
another slot.
If you have no idea about RAM, then click on the below hyperlinks "Images".
RAM
Removing a RAM
Check your RAM also. Even bad RAM will result in display problem.
If you are having two RAMs then remove it, place only one RAM and check the
display. If you failed to get any display then change the slot. If you still failed to
get the display then try the above procedure with the other RAM.
If you are using a graphic card, then remove it and place it back properly.
Good Luck
Try this 1
If you notice that your CPU fan is running but there is no display in the screen,
then remove the RAM from the slot, clean it and place it back properly or try
another slot.
If you have no idea about RAM, then click on the below hyperlinks "Images".
RAM
Removing a RAM
Check your RAM also. Even bad RAM will result in display problem.
If you are having two RAMs then remove it, place only one RAM and check the
display. If you failed to get any display then change the slot. If you still failed to
get the display then try the above procedure with the other RAM.
If you are using a graphic card, then remove it and place it back properly.
Good Luck
