Search : in
By :

Ip configuration

Last answer on Jun 18, 2009 11:14:47 am BST sasi, on Feb 17, 2009 12:23:24 pm GMT 
 Report this message to moderators

Hello,


how to configure ip address(windows XP,& 2003) in command prompt.

Configuration: Windows XP
Internet Explorer 7.0

Best answers for « ip configuration » in :
[Windows] knowing the IP configuration of a PC Show [Windows] knowing the IP configuration of a PC IP configuration of a PC Open a DOS command window: Open the Start menu Click on Run Type cmd Click on OK In the MS-DOS window, type the following command ipconfig/ all Note...
Quickly change IP configuration with netsh Show Quickly change IP configuration with netsh Issue Solution Issue Sometimes it happens that your status is not systematically set as DHCP client, depending on the environment in which it operates. It becomes cumbersome to constantly...
NETWORK IP & CONFIGRATION Show
Problem IPconfig ShowProblem IPconfig Problem Solution Problem When executing the following command to Start> Run> ipconfig /renew The below error message displays on your screen: An error occurred while renewing interface Local Area Connection:...
Sudden closure of the ipconfig or ping (cmd) window ShowSudden closure of the ipconfig or ping (cmd) window Issue Solutions Issue Whenever you run a command from the menu start/Run, the command window opens and immediately close without giving the time to consult the screen....
Having a static IP address under Ubuntu 8.10 ShowHaving a static IP address under Ubuntu 8.10 To have a fixed IP persistent: Configure manually the interfaces For a fix IP (10.0.0.1 on your eth1 interface) use: To make use of dynamic IP (e.g eth0): DNS NetworkManager is a...
Network tests and diagnostics ShowTesting the IP configuration Before doing anything else, you are advised to check the computer's IP configuration. Windows systems offer a command-line tool, called ipconfig, that lets you find out your computer's IP configuration. The output of...
IP protocol ShowThe role of IP protocol IP protocol is part of the Internet layer of the TCP/IP protocol suite. It is one of the most important Internet protocols because it allows the development and transport of IP datagrams (data packets), without however...
Windows networking ShowNetworking in Windows 2000/XP To configure each computer, simply go to the control panel, then double-click "network connections" and right-click "local area connection", then choose properties! The local area connection window displays the...
Ask your question Reply

1

milkyway, on Feb 19, 2009 2:19:50 am GMT

To config ip via command prompt, use netsh

Here you can download complete guide of netsh - http://forkus.com/docs/download/netsh

   
Reply to milkyway

2

 Manojahoo.com, on Jun 18, 2009 11:14:47 am BST
  • +1

You will get your ip windows xp and 2oo server ip 192.168.0. something your best local networking
subnet 192.168.0.1 and other
defultget way 255.255.255.0
and next DNS 202.70.64.15 r
'" ' " " 202." " .5

than other setting router just defult your main ip ok more information log on to http://en.netlog.com/manoj_khadka1984

   
Reply to Manojahoo.com
Ask your question Reply
They need your help