Search : in
By :

I have no signal to the monitor and no power

Last answer on Feb 8, 2009 12:08:40 pm GMT anthony, on Feb 8, 2009 12:02:46 pm GMT 
 Report this message to moderators

Hello,

my computer when i switch on. i have no signal to the monitor and no power to the keyboard and mouse. but the CPU still running. can any body help please??

Configuration: Windows XP
Opera 9.63

Best answers for « i have no signal to the monitor and no power » in :
[Laptop]Can't exit Power saving mode Show[Laptop]Can't exit Power saving mode Issue My Laptop is stuck on Power saving mode. My computer enters Power saving mode at completely random times, my screen goes blank and it says "Entering Power saving mode" after which the green Power...
"No Signal" message on Monitor Show“No Signal” message on Monitor When switching on your CPU, you can get the message “No Signal” displayed on your monitor, though the whole system is running. This issue might be due to several factors that you should check...
How to test your computer's power supply ShowHow to test your computer's power supply To be able to test your computer's power supply, you can follow the instructions below: 1. Turn off your power switch and plug it out from the power supply. 2. Remove the cable from the CPU and start...
Introduction to power line communications (PLC) ShowIntroduction to PLC "Power Line Communications" basically means any technology that enables data transfer at narrow or broad band speeds through power lines by using advanced modulation technology. Depending on the country, the institution and the...
PLC technologies ShowTransmission channel The electrical supply network cabling was not tested to see if it could transport high frequency (HF) signals. One must therefore consider the constraints of this medium to ensure good transmission of HF signals without...
Computer screen or monitor ShowIntroduction to computer monitors A monitor (or screen) is a computer display unit. There are generally said to be two families of monitors: Cathode-ray tube monitors (or CRT for short), which are used with most desktop computers. They are...
Ask your question Reply

1

 moulkou, on Feb 8, 2009 12:08:40 pm GMT

Check out if the cables are correctly connected.if this does not work then test your keyboard and monitor on another PC ,to determine whether its the peripherals that are not working properly or its the CPU who is faulty

   
Reply to moulkou
Ask your question Reply
They need your help