Search : in
By :

BSNL Broadband Connection problem

Sundar, on Dec 16, 2008 3:31:08 pm GMT
 Report this message to moderators

Hello,

I got new BSNL broadband connection for my Home PC and they gave me UT-300R2U ADSL Modem. Its detecting the IP Address and I am able to ping 192.168.1.1 using command prompt and also able to see the correct IPConfig.
But I am not able to access the Internet. It says...Page cannot be displayed, please let me know what are the changes the needs to be done. The person who came to give connection from BSNL says its problem with my PC whereas I got this system newly with high end configurations. Please help in this issue.

Thanks,
S

Configuration: Windows XP
IE

1

pari, on Dec 24, 2008 5:53:30 am GMT
  • +6

HI
I too have the problem.I formatted my machine and at the start it was working fine.But after some time once again the 'the page cannot be displayed' error came.

parimala

   

2

reaper, on Dec 24, 2008 8:34:43 am GMT
  • +7

Hi

plzz solve my problem i m unable to use net bcoz when i connect to internet connection then veryfying user name and pssword my internet password was right it work properly on my laptop but not on my laptop plzzz helppp thannxxxx in advance

;0

   

7

vijay, on Apr 18, 2009 4:42:25 pm BST
  • +1

Hi, i hav got same problem as urs..if u get the solution please forward it to my email id(vijaypaw@gmail.com) ..thx
in advance

   

11

sudhir, on May 21, 2009 6:11:36 pm BST
  • +4

Dear sir,
i have bsnl broadband connection and SIEMENS c2110 modem(1 ethernet port , 1 USB port)
my computer was working good and also internet (through ethernet cable). yesterday i formated my system, then loaded all the softwares, drivers properly. now when i connect to net, web page opens and after sometime(15 sec to 30 sec) the pc hangs on. this happens also when i open yahoo msngr, or update any software, any internet related work. then i formated my pc again but the problem still remains.
but when i connect net through USB port it is woring well.
please help.
sudhir

   

3

Ram Mohan, on Jan 21, 2009 5:16:49 am GMT
  • +2

Hi,

There is some prob with the Automatic connect prob with the BSNL server.

Please try the following steps

Switch on the modem

Check that the Internet LED is blinking

If blinking then type http://192.168.1.1 in IE

Give user name and password as admin

Select Advance set up and select WAN

Click the EDIT button in the first row

Click next come to second page

Change the Connection type as Bridging

Please dont make any ohter changes

Save the change and then Save/Reboot in initial page


Go to connection setting in Network Center

Try to connect, if it is asking for user name and password provide the valid credentials. some times the user name will be given as ur BSNL email id. remove the @ and remaining parts from user id and try it


it worked for me. let me know if u have any queries

   

4

Chetan Gupta, on Mar 9, 2009 3:40:51 am GMT
  • +3

Hello Sir

I am chetan gupta from Haridwar, I want to know that once we are doing reset router from http://192.168.1.1 after resetting i am not connect my bsnl broadband through broad band dialing connection it is connect automatically or either connect through http://192.168.1.1 go to advance -> internet -> bridge connection -> connect then connect internet through bsnl site what is the solution for connecting through broad band dial up connection.

Regards

Chetan Gupta

   

8

buredurgagod, on May 7, 2009 8:16:29 am BST
  • +3

When i type 192.168.1.1 it gives the web page could not be displayed. even my inet bulb is not blinking. please help me. send it to my e mail. my e amil address is buredurgagod@zapak.com.

   

9

Camphor, on May 11, 2009 6:35:58 am BST
  • +1

Kindly check your LAN ip address, it has to be in the same network (192.168.1.X) to access the modem configuration page @ http://192.168.1.1. Incase if your not sure chage the Ip address setting to assign automatically and try

hope it helps

   

10

sam, on May 17, 2009 9:47:28 am BST

Dear ram,
this method i used to adapt but wen i want to connect another computer using router it is nt connecting and giving error user line busy. do u ve any solution for that.

   

5

SteeLx, on Mar 9, 2009 5:32:41 am GMT

Please make sure u have ppoe services installed properly, use OpenDNS in BSNL modem home page.

208.67.222.222
208.67.220.220

u can open it by going in browser > Open http://192.168.1.1 or 192.168.0.1

go in WAN set there DNS as stated.

   

6

Aaditi Computers, on Mar 9, 2009 9:50:03 am GMT
  • +9

Dear Mr Chetan.. When you reset a broadband modem, the first thing that happens is the settings in modem which were previously saved gets erased. so now you have to make new settings. for that you have 2 options either bridge or ppoe. if you have a made a dataone connection and u have a shortcut on ur desktop that means u need to create a brigde connection. You type http://192.168.1.1 in ur browser login in modem then make new connection type name as BSNL and select bridge type connection VPI and VCI set to 0 & 35 leave other settings as they are then apply and ok
now the most important steps to be done are.... please follow these simple but imp steps
after this go to tools menu
save all
then click restart
your lan will get disconnected for a while
it will take nearly 2-4 minutes and u r done

now make a new connection on ur network connections.. select connection to internet
manually
then braodband connection that requires user name and password
input ur user name and password
isp name either Dataone or BSNL will do
place shortcut on desktop
and ok

now u can connect it as normally as u could do it before
regards
Dipesh Bothra, Aaditi Computers

   

12

sangsarsing, on Aug 10, 2009 4:38:47 am BST
  • +1

No automatic broadband connection in laptop running vista home premium with bsnl modem siemens c2110 type1 asking for passward and dial up,though local connection is easy ,diagnose and repair option sometimes okays the problem.Original internet connection is easy on desktop running xp professional with same modem and line.In both computers, internet explorer 8 stops while trying to open certain safe sites with explorer no add-on,medium high antivirus security setting, displaying "internet explorer stops working,finding solution" and "this tab closed and recovered successfully"

   

13

 rajesh, on Aug 10, 2009 2:29:12 pm BST
  • +1

This problem is definitely related to virus.
kindly put good updated antivirus on your comp & after re-boot scan for viruses and clean the same.
this is happened to any old or latest new comp.

kindly reply

rajesh todkar
pune
09850846651

   
They need your help