Configuration: Windows XP Internet Explorer 6.0
Hello
The command used to copy a comfiguration from a router to a TFTP host is copy running-config tftp, or copy startup-config tftp |
|
Copy a Cisco IOS Image from the Router to the TFTP Server
Step-by Step Instructions Complete these steps: 1. Perform one of these tasks: * Create a new file, router-image, in the /tftpboot directory of the TFTP server. On UNIX, use the syntax touch <filename>. touch router-image * Use the same file name shown in the show flash output in order to create the file on the /tftpboot directory of the TFTP server. For this example, the router lists c2600-i-mz.122-2.XA as the output for the show flash: command. touch c2600-i-mz.122-2.XA 2. Change the permissions of the file to 777 with syntax chmod <permissions> <filename>. chmod 777 c2600-i-mz.122-2.XA 3. From the management station command line, with the use of the MIB object flashToNet, enter this information: % snmpset 172.16.99.22 private .1.3.6.1.4.1.9.2.10.9.171.68.191.135 s c2600-i-mz.122-2.XA enterprises.9.2.10.9.171.68.191.135 = "c2600-i-mz.122-2.XA" SOrry but i prefered to copy it from the link i use for CISCO networks ;O) http://www.cisco.com/warp/public/477/SNMP/11_7910.shtml You will find 'em all there - take care |
Résultats pour copy a router IOS to a TFTP
Résultats pour copy a router IOS to a TFTP
Résultats pour copy a router IOS to a TFTP
Résultats pour copy a router IOS to a TFTP
Résultats pour copy a router IOS to a TFTP