Search : in
By :

Sata

Last answer on Oct 29, 2009 12:56:25 pm GMT rage, on Oct 29, 2009 12:23:43 pm GMT 
 Report this message to moderators

Hello,
i have a p.c. running an ide hdd as master ,also have a sata hdd that i put in but it is not picked up in bios or o.s..the o.s. was just installed and need to get sata to operate .please could someone help me out?
thanks

Configuration: Windows XP
Firefox 3.5.4

Best answers for « sata » in :
Serial ATA (SATA or S-ATA) Show Introduction The Serial ATA standard (S-ATA or SATA) is a standard bus allowing high-speed storage peripherals to be connected to PC computers. The Serial ATA standard was introduced in February 2003 in order to compensate for limitations of the...
Installing Windows XP on a SATA hard drive Show Installing Windows XP on a SATA hard drive Motherboard Model Downloading SATA drivers Windows Installation With floppy Without floppy Another way You can install Windows XP on a SATA hard drive… It may not be easy as the system...
Download Driver / SATA RAID motherboard Gigabyte GA-MA78G-DS3H Show
[S-ATA] SATA HDD not recognized Show[S-ATA] SATA HDD not recognized Unlike IDE disks, the Serial ATA drives are not natively recognized by the system. It is usually needed to install the Serial-ATA drivers that come with your motherboard so that the operating system ...
Vista - Increasing SATA Disk drive performance ShowVista-Increasing SATA Disk drive performance Your SATA hard drive performance can be increased, it just enable write caching. This is very useful if your computer or laptop suddenly shuts down to prevent data loss/corruption! This...
Ask your question Reply

1

 closeup22, on Oct 29, 2009 12:56:25 pm GMT

Hi there,

can you please give more information

how you set the jumper on the other hard drive?

Thanks

   
Reply to closeup22
Ask your question Reply
They need your help