Matshita-dvd-ram-uj-850s-ata-device

If you don't have upper or lower filters in your reg, then the problem is not in the register. I had a fujitsu siemens laptop that came with vista. I installed the xp instead and had everything else working but the Matshita uj 850-s dvd-ram drive. The reason that dvd-ram wasn't working with xp was that I had to change the "SATA Controller mode option" to "Compatible" to make installation possible. Because hard drive and dvd-ram were in same area 0, this meant problems with dvd-ram. To get the dvd-ram working I had to do these steps:





1. Download AHCI driver (7zim06ww.exe) from this site: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62909 and install it to c:\drivers\win\sata



2. Restart your computer and go to BIOS.



3. In BIOS find "Serial Controller mode option" (in fujitsu siemens: advanced\internal device configurations\serial ata controller:\sata controller mode option) and change it to "Enhanced".



4. Make sure that AHCI configuration is marked as Disabled



5. Save and Exit



6. In windows put a dvd in the dvd-ram and test if it works. In my case it did work.



Changing the mode to Enhanced might make your OS to find new devices, in my case "PCI serial port" and "PCI Simple Communications Controller". To get these work you need to install AMT drivers that you can find from your manufacturers website, or Intels AMT by searching google.



Hope this helped those that didn't have Lower and Upper filters in Register. For me it took quite a while to realise where the problem was...



-Gradimmah

my dvd burner called matshita-dvd-ram-uj-850s-ata-device is not working atall.Please give me solution to rectify this problem