Search : in
By :

Hard drive

Last answer on Sep 30, 2009 9:45:55 am BST jockey, on Sep 30, 2009 9:19:40 am BST 
 Report this message to moderators

Hello,, i have two sata drives setup both bootablew with xp pro, but when i boot in either drive you can see the other drive, how do prevent from seeing the other disc when i log into the other disc. So what ever drive i boot from i only want to be able to see that drive

boot from drive A only see drive A not drive B
boot from drive B only see drive B not drive A

thanks

Configuration: Windows XP Internet Explorer 7.0

Best answers for « hard drive » in :
Partition - Partitioning a hard drive Show What is a partition? The partitioning of a hard drive occurs after the drive has been physically formatted but before it is logically formatted. It involves creating areas on the disk where data will not be mixed. It can be used, for example, to...
PC Assembly - Hard drive installation Show Hard drives, CD-ROM, DVD-ROM drives and floppy drive The motherboard usually has two IDE (Integrated Device Electronics) connectors: The first connector is known as the primary device controller; The second is known as the secondary device...
Hard drive Show The role of the hard drive The hard drive is the component which is used to permanently store data, as opposed to RAM, which is erased whenever the computer is restarted, which is why the term mass storage device is sometimes used to refer to hard...
Formatting Your Hard Drive ShowFormatting Your Hard Drive Formatting and installing your Hard drive using the installation CD ] A hard disk drive is a non-volatile device mainly for data storage. Usually faster than any other storage device, this essential...
Installing Windows XP on a SATA hard drive ShowInstalling Windows XP on a SATA hard drive Motherboard Model Downloading SATA drivers Windows Installation With floppy Without floppy Another way You can install Windows XP on a SATA hard drive… It may not be easy as the system...
New Hard drive installed – what to be done? ShowNew Hard drive installed – what to be done? Initializing the HDD Creating new partitions and formatting First You bought a new hard drive but it doesn’t appear in My Computer? It needs to be initialized and formatted for...
Formatting - Formatting a hard drive ShowBefore trying to understand formatting, you first need to understand how a hard drive works. Many people do not distinguish low-level formatting (also called physical formatting) from high-level formatting (also called logical formatting). Even...
History of the hard drive ShowHistory of the hard drive The first hard drive was invented in early 1956, at the request of the US Air Force, by the company IBM. It was called the RAMAC 305 (with the name standing for Random Access Method of Accounting and Control), a group of...
Operating Systems - Installing MS-DOS ShowInstalling MS-DOS When installing MS-DOS, make sure that in the BIOS the the boot disk is set to A: first, then the hard drive (boot sequence: A:, C:) Then insert disk 1 in the A: drive, power up the computer, then follow the on-screen...
Ask your question Reply

1

 LouisSteph, on Sep 30, 2009 9:45:55 am BST

Dear Jockey,

You can set up privilege settings on it in order to solve your problem.

Thanks.

   
Reply to LouisSteph
Ask your question Reply
They need your help