I would like to add that I never lose signal. It is always a great 5 bar signal that I have, just the internet that decides to stop working.

If u r using a linksys router then assign a static ip address to the wireless network connection. try this
ip address: 192.168.1.15
subnet mask: 255.255.255.0
gefault gateway 192.168.1.1
dns 192.168.1.1 or 4.2.2.2

if it does't work then select it to automatic and do ipconfig from cmd and let me know the results of ipconfig i will give u a new static ip add.
ENJOY!

Thanks for the help Shashank, I appreciate it.

Do I have to do this configuration from the other guys computer or can I do it from my computer upstairs?

Are these the proper steps for what you are telling me?

Assigning a Static IP Address to a WiFi Network Adapter
Right-click the wireless network connection icon on your taskbar, then choose Open Network Connections.

Right-click the network connection you want to change.

From the list of options, select Status from the menu.

You can then select Properties.

From the menu, highlight Internet protocol TCP/IP and then click the Properties button.

You will see a couple of options, the first is Obtain IP Address Automatically. But we want to select the second option: Use the following IP Address.

You'll need to enter both an IP address and a Subnet Mask. Since you're behind a router, you should already know your IP address is something like 192.168.1. x (where x is a number). Your router probably already has an IP address like 192.168.1.1, so you will increment the final didgit by one for each PC. So the first computer you change to static IP address will have an IP address of 192.168.1.2 and a subnet mask of 255.255.255.0.

Under the Default Gateway, put the internal IP address of the router, because this is the computer's gateway to the Internet.

Under the Use The Following DNS Server Address. You can get those address from your ISP. Or, this infor might already be viewable inside of yor router's setup.

You will need to make sure thet DHCP is turned off in the router's setup.




I am no the most computer savvy person so if you can dummy some of things down a little bit for me I appreciate it.

Thanks!

I have no idea how to get to the screen to change my static Ip ...?>

Hello

I have to things. I have two connections showing up in my network places, i am assuming one is for my cable internet connection. the other must be for my network??

When i try to assign IP address' do i do it to both? when i do it to the one i lose my internet connection all together.

Also when i check off the box "share internet connection with other computers" i lose my internet all together

can you help me?