Search : in
By :

Problem with bsnl wifi modem ITI DNA-A211-I

Last answer on Oct 29, 2009 12:07:10 pm GMT kRrIsH, on Jul 3, 2009 1:30:39 pm BST 
 Report this message to moderators

Hello,

i recently taken bsnl broadband connection with a wifi modem ITI DNA-A211-I. i can surf the internet via my desktop(wire) and laptop(wireless) individually. but i cann't access my internet from both ends at a time. if i connected to internet from my desktop(wire), then i am unable to connect the internet via my laptop(wireless). same thing happening in vice versaa...

please help me to access the internet from both the ends at a time......desktop(wire) and laptop(wireless).

waiting for your kind cooperation

cheers :)
kRrIsH

Configuration: Windows Vista Internet Explorer 8.0

Best answers for « problem with bsnl wifi modem ITI DNA A211 I » in :
LAN, Internet connection: choosing your router ShowLAN,Internet connection:Choosing your Router Intro Case 1 Case 2 Case 3 Options and features to consider Standards required for a WiFi router New Standards Intro A router comes in the shape of a box connected to your computer....
Make calls from your PC ShowMake calls from your PC Telephone modem CTS Voice Mode Data Mode Call from PC to PC Call with an ADSL modem from PC to phone. Do not mix PSTN and ADSL! With a modem 33 or 56Kb / s, to connect, the modem dials the phone...
Introduction to network bridge ShowIntroduction to network bridge What is a bridge? XP network bridge: between a wired network and a WiFi network What is a bridge? A bridge has a foot in each network and acts on the link layer (level 2). It is able to pass frames from...
Download OnScreen DNA Lite ShowEither you are a teacher or student, you have already heard about DNA once in your life. OnScreen DNA is a 3D model of the double helix of DNA. It only includes its essentials structure including: sugar-phosphates, nucleotides and hydrogen bonds...
Creating an ad hoc WiFi network ShowPresentation of the ad hoc WiFi network If you have two or more computers equipped with wireless adapters (WiFi cards), it is possible to easily connect them in a network by setting up a so-called "ad hoc" network, that is, a computer-to-computer...
WPA - WiFi Protected Access ShowIntroduction to WPA WPA (WiFi protected Access) WiFi network security solution offered by the WiFi Alliance, in order to fill gaps in WEP. WPA - WiFi Protected Access WPA is a "light" version of the 802.11i protocol, which relies on...
Creating a WiFi network in infrastructure mode ShowPresentation of the WiFi infrastructure network The set-up of a Wi-Fi network in infrastructure mode is very similar to that of a computer-to-computer Wi-Fi network except for the following differences: A Wi-Fi network in infrastructure mode...
Ask your question Reply

1

realiser, on Jul 3, 2009 4:50:43 pm BST

Hello,

All you have to do is to renew your IP address on one of your machine!

To do so just run command (CMD )

Type:

Ipconfig /release

Ipconfig /renew

This is a common problem you are having due to IP address conflict!

Thanks

   
Reply to realiser

2

kRrIsH, on Jul 4, 2009 5:53:50 am BST
  • +1

Thank for your suggetion...but in my desktop(wire) and laptop(wireless) both havin statik ip address...
desktop is having .........1.9 and laptop having .........1.10 ip adress. so there should be no ip conflict. eventhough it is not working.

Regards,
krrish

   
Reply to kRrIsH

3

rakshit, on Jul 25, 2009 1:54:46 pm BST
  • +2

Hey , 1 have the same problem. i'll b happy if sumone could help me on this.....

   
Reply to rakshit

4

ravi, on Jul 31, 2009 9:32:46 am BST
  • +3

Pls open your IE

type 192.168.1.1
passwoed admin
usrname admin


set auto

   
Reply to ravi

5

Riddhish, on Sep 11, 2009 4:16:24 pm BST
  • +1

There is no option of "set auto"

   
Reply to Riddhish

6

DHANU, on Sep 27, 2009 11:17:50 am BST
  • +2

Type 192.168.1.1
username admin, password admin
go to advance setup, select wan
for protocol PPPoE click EDIT button
service category- UBR without pcr
click next - select PPP over Ethernet (PPPoE) click next
here u will find authotication method - that u have to set to auto. that means router will connect automatically.
u dont need to dial from your pc. after save setting reboot router/modem.
just open internet explorer .. u will be connected.

   
Reply to DHANU

8

vinay, on Oct 27, 2009 11:19:15 am GMT
  • +1

I connected internet to my pc but how to connect laptop what do there

   
Reply to vinay

11

 ayush, on Oct 29, 2009 12:07:10 pm GMT

How to connect apple ipod or mobile with net using bsnl nokia seimens type 2 network,as in short i want to make the net direct i.e. when the network is created i give password and the net browsing is on for use i.e. no dial up or PPPoE connection is required .........................and as we use wifi at malls or service center

   
Reply to ayush

7

nik, on Oct 8, 2009 9:49:41 am BST
  • +1

Wat dhaanu said is corrent...
but d problm wid dis thingy is dat wen ur modem is switched on ur internet is on...
so if u plan 2 automatically dnld something at 2 and switch ur modem on b4 2, ur usage wuld account d non free time usage also...

   
Reply to nik

10

dhanu, on Oct 27, 2009 1:56:30 pm GMT

Hi nik,
i have only given setting for auto dial. If ur plan is limited. i.e. of Rs.250, 500 then don't go for auto dial from router. Do dial up from your pc.
Dhanu

   
Reply to dhanu

9

dhanu, on Oct 27, 2009 1:51:56 pm GMT

Hi Krish,

Connect to internet / router from more than one pc.

There r very simple steps,
login with admin / admin -> go to advance setup -> go to port mapping ->u will see there is only eth0_2 is checked. eth0_2, eth0_3, eth0_4, eth0_5 are your ports that is four ports. only one u checked means, only one can access your router or internet at one time. if u want to connect 2 pcs at a time then check for eth0_3. save setting. now u can access both from desktop and wireless laptop..
i think now things will be ok !
dhanu

   
Reply to dhanu
Ask your question Reply
They need your help