Search : in
By :

Booting without pressing the on button on the

Last answer on Jul 3, 2009 10:26:21 pm BST simony, on Jun 3, 2009 12:55:09 pm BST 
 Report this message to moderators

Hello,
I hve bought a new case with a switch near the power supply unit at the back. As soon as I turn the switch near the PSU to the on positin the computer starts without even pressing the on button at front of the panel. I can only turn it of using the switch near the PSU. What might be the problem?

Second question: i have assembled a new computer with everything done properly folowing the motherboard manual. I then installed my memory and " PowerColor X1650PRO 512MB AGP Graphics Card " which is AGP 8X graphics card . my sound card is "Sweex 7.1 PCI Sound Card" and my motherboard is " ASROCK AM2NF3-VSTA ATX MOTHERBOARD, AMD AM2 CPU SUPPORT, NVIDEA NFORCE2 250 CHIPSET, 4 X DUAL CHANNEL DDR2 800, 8 CHANNEL AUDIO, 10/100 LAN, 1 X AGP 8"
When I switch the machine on, nothing appears on the monitor ie not even the BIOS information is shown on the monitor. There is simply no communication between the monitor and the graphics card. what might this problem be? hOw can i fix these problems ?

Thanks

Best answers for « booting without pressing the on button on the » in :
Disk boot failure - Insert system disk and press Enter ShowDisk boot failure - Insert system disk and press Enter A new hard drive was installed The hard drive is unplugged Corrupted system files Damaged disk If it happens that you are prompted by the following error message "DISK BOOT...
Error Message: Disk Boot failure ShowError Message: Disk Boot failure-insert system disk and press enter Solution 1: Ensure that your drives are empty Solution 2: BIOS set up Solution 3: New hard drive configuration Solution 4: Hard drive not properly plugged in Solution 5:...
Booting Windows XP in Safe Mode ShowBooting Windows XP in Safe Mode What is Safe Mode? How to get into Safe Mode with Windows XP How to get into Safe Mode with Windows XP Home edition How to get into Safe mode by the System Configuration Utility What is Safe...
Download Vista Boot Pro Show
Download Ultimate Boot CD ShowUltimate Boot CD ( UBCD) is a CD bootable containing an outfit of tools which can show itself of a big utility when the system refuses to start: -Diagnosis hard disk (Maxtor, Seagate, Samsung, Digital Western and IBM). -Cloning of disk (g4u,...
Download Emergency Boot CD Show
Book disk ShowSystem disk A system disk, also sometimes called a boot disk, is a disk that will allow you to start a computer when the operating system no longer responds, as the result of a virus for example. This disk contains special information that makes it...
Ask your question Reply

1

zinzer, on Jun 3, 2009 2:14:16 pm BST
  • +1

1st: You must check the power connection of the front panel to the motherboard! May be you have done wrong connection!

2nd: Check if you connected properly the graphic card on the slot! and you can also check the DDR Ram modules!

   
Reply to zinzer

2

 Witness, on Jul 3, 2009 10:26:21 pm BST

I have the same problem as you describe in your first question. It turn out to be an option in the SETUP (right before the OS load). While in the SETUP, I choose BOOT, and depending of your mobo there is an option about returning power after AC lost, I disable it and it turn out fine now.

   
Reply to Witness
Ask your question Reply
They need your help