Search : in
By :

IDE to SATA

Last answer on May 26, 2009 11:10:22 pm BST Pbros, on May 26, 2009 2:37:31 pm BST 
 Report this message to moderators

Hello,

I am using a IDE hard disk as primary master and also connected a SATA hardisk as the secondry master and i have installed the OS on my primary hard disk but when i try to copy data from the primary hard disk to the secondry the system either hangs or copies just doesn't go through. Iam using a IDE to SATA converter so could any one advise on this

Configuration: Windows XP Internet Explorer 7.0, Processor Pentium 4   2.4GHz, Motherboard Intel 845chipset, Memory 256 MB, OS : Xp

Best answers for « IDE to SATA » in :
[S-ATA] SATA HDD not recognized Show[S-ATA] SATA HDD not recognized Unlike IDE disks, the Serial ATA drives are not natively recognized by the system. It is usually needed to install the Serial-ATA drivers that come with your motherboard so that the operating system ...
Enabling the Ultra DMA on an IDE hard disk ShowEnabling the Ultra DMA on an IDE hard disk Principle Getting started Implementation hdparm Principle Under Linux, the Ultra DMA mode is not enabled by default. hdparm is a utility included with most linux distributions,...
Installing Windows XP on a SATA hard drive ShowInstalling Windows XP on a SATA hard drive Motherboard Model Downloading SATA drivers Windows Installation With floppy Without floppy Another way You can install Windows XP on a SATA hard drive… It may not be easy as the system...
Download HDD Low Level Format Tool Show
Download Driver / SATA RAID motherboard Gigabyte GA-MA78G-DS3H Show
Download NetBeans IDE ShowNetBeans IDE 6.1 is an excellent IDE of C/C ++ development written completely in Java. The syntactic tint, the "Code Completion" and many other options belong to NetBeans. One of the main asset of NetBeans is that it is based on a module concept :...
Serial ATA (SATA or S-ATA) ShowIntroduction The Serial ATA standard (S-ATA or SATA) is a standard bus allowing high-speed storage peripherals to be connected to PC computers. The Serial ATA standard was introduced in February 2003 in order to compensate for limitations of the...
ATA, IDE and EIDE ShowOverview The ATA (Advanced Technology Attachment) standard is a standard interface that allows you to connect storage peripherals to PC computers. The ATA standard was developed on May 12, 1994 by the ANSI (document X3.221-1994). Despite the...
PC Assembly - Hard drive installation ShowHard drives, CD-ROM, DVD-ROM drives and floppy drive The motherboard usually has two IDE (Integrated Device Electronics) connectors: The first connector is known as the primary device controller; The second is known as the secondary device...
Ask your question Reply

1

 King_Kong, on May 26, 2009 11:10:22 pm BST

I have never had any experience in using IDE to SATA converters, but maybe check your BIOS and make sure RAID is turned off. Maybe turn it on if it is already off.

   
Reply to King_Kong
Ask your question Reply
They need your help