Ask a question »

Dual Channel RAM

April 2015

Using dual channel memory equips you with two RAM pipelines to the CPU, to eliminate a bottleneck due to system bus. Most dual channel boards have one stick of RAM set to single mode. To make use of dual channels, you have to get a similar pair of RAM intended for use in your system. If you have 2 sticks of different capacity and memory size, ascertain that they have the same hardware configuration and build. Deploy the RAM in similar colored points, for example, when one RAM is inserted in the blue slot, the other must also be in a blue slot. This will make the dual channel activate. If the colors mismatch, the dual channel mode will not work. Make sure to have the same style chip in both slots of the same color.

Dual Channel RAM




Intro


Some memory controllers provide a dual channel for memory. The aim is to use the memory modules in pairs and combine the bandwidth therefore maximizing the capacity of the system. Note: It is recommended that, when using Dual Channel, you use identical memory sticks in pairs (frequency, capacity, of the same brand if possible).


Memory locations are noted as indicated below:

Dual Channel: [A1-A2] and/or [B1-B2]
  • A1 = 1st place (slot 1)
  • B1 = 2nd place (slot 2)
  • A2 = 3rd place (slot 3)
  • B2 = 4th place (slot 4)
  • *[A1-B1] = Group 1 on the motherboard.
  • *[A2-B2] = Group 2 on the motherboard.

Important notes

  • The following frequencies of memory stick are compatible with dual channel technology: DDR1600, 2100, 2700, 3200 and those with a higher frequency.
    • When using a single RAM stick then location A1 must be configured in single channel mode.
    • When using 2 RAM sticks of different brands then locations A1 and B1 must be configured in single channel mode.
  • To enable dual channel mode, it is necessary to use 2 (identical) RAM sticks in the A1 and A2 slots.
  • If you want to use 3 RAM stick of different brands, it is necessary to use 2 identical bars in the first group (A1 and A2) and the last one, of any other brand but with the same frequency in B1.
  • Finally, if you want to install a 4th memory stick in slot B2, it is necessary to use one similar to that in B1.
  • On motherboards having both 2 DDR2 ports and 2 DDR ports, only DDR2 ports can be used for Dual Channel.
  • This manipulation can be considered an inexpensive update, increasing the life span of your PC.
For unlimited offline reading, you can download this article for free in PDF format:
Dual-channel-ram.pdf

See also

In the same category

Funcionar en Dual Channel
By Carlos-vialfa on June 16, 2008
Dual Channel - RAM
By homedual on April 22, 2004
Come implementare Dual Channel
By nane77 on November 24, 2009
Como colocar-se em dual channel
By ninha25 on October 7, 2009
Original article published by homedual. Translated by netty5. - Latest update by deri58
This document entitled « Dual Channel RAM » from Kioskea (en.kioskea.net) is made available under the Creative Commons license. You can copy, modify copies of this page, under the conditions stipulated by the license, as this note appears clearly.