Kioskea
Recherche
Ask a question »

Boot from your USB drive under VMWare

March 2015

If you are able to boot VWware through a USB stick when creating or testing a bootable USB drive, you are lucky because VWwareand virtualBox do not support USB naturally. But for everyone else, with free software known as Plop, you can boot them from a USB drive. When Plop prompts, you have to load the programs from USB or a hard disk, providing that you have set up the BIOS. Plop works with VirtualBox and VMwar. It's not mandatory to load the operating system for a virtual machine; having an "empty" virtual machine is ok. After downloading the Plop Boot manager, save by uncompressing the ISO logo to the hard disk.

Boot from your USB drive under VMWare



The VMWare virtual machine's BIOS does not offer the option to boot from USB. It's quite a disadvantage because this is very convenient for testing - for example - the Linux distributions on a USB key.

There is still a way to do it:

  • Make sure your USB drive is connected, choose USB with the up/down arrows and press ENTER

  • Note: This trick doesn't work with VirtualBox
  • Thanks sebsauvage for this tip.

For unlimited offline reading, you can download this article for free in PDF format:
Boot-from-your-usb-drive-under-vmware.pdf

See also

In the same category

Published by deri58. - Latest update by Paul Berentzen
This document entitled « Boot from your USB drive under VMWare » from Kioskea (en.kioskea.net) is made available under the Creative Commons license. You can copy, modify copies of this page, under the conditions stipulated by the license, as this note appears clearly.