The device drivers
for the sound card have to be properly installed on the computer system for the sound to work. The device cannot start (Code 10) error
occurs when the FailReasonString
is missing from the hardware key of a device. If there is an error with the sound driver and the device cannot start (Code 10)
, the issue could be related to a missing or incompatible audio device driver
. The latest audio card device drivers
can be downloaded for free from the official website of the device manufacturer. The sound card driver can be updated through the Update Driver
option in the Windows Device Manager
Sound driver - This device cannot start (Code 10)
I formatted my C drive and while installing the drivers from CD no sound drivers were shown. Even if I install them there is an error, the device may not work (code 10) - I tried re-installing, but still the same problem occurred.
AMD Athlon, Gigabyte-7VM400M-RZ.
If you run into the error: This device cannot start Code 10 (often followed by a driver identifier).
The Windows error, This device cannot start (Code 10) or This device cannot start (Code 10), is a hardware error that most commonly means that you have a bad, missing, or incompatible device driver.
So, for example: This device cannot start (Code 10) in audio driver, means that you have a bad or missing or incompatible driver for your sound card.
The technical explanation for this message, according to Microsoft, is this:
If the device has a FailReasonString value in its hardware key, that string appears as the error message. The driver or enumerator puts this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message:
This device cannot start. (Code 10)
What does that mean in plain English? It means that if the device which is throwing the error has added its own custom error text to your Windows system when the device was installed, then when the device encounters an error, you will see the custom error message specific to that device. But if it doesn't have its own custom error message, then Windows uses its own generic error message for devices, which is: This device cannot start. (Code 10)
Microsoft recommends that when this happens, you click Update Driver to update the drivers for the device. You can also start the Windows troubleshooting wizard by going to the general properties tab of the device, and clicking on Troubleshoot.
Before doing this, be sure that you have the correct and most up-to-date versions of the driver(s) for that device. You can also try uninstalling and reinstalling the device, using the disk which came with it.
Finally, you can go to the website of the device's manufacturer, and check their downloads or support section for current, up-to-date drivers.
Here is a link to the motherboard drivers
Thanks to xpcman
for this tip on the forum.
In the same category
Published by aakai1056
. - Latest update by Celia Gatward